Anatomical Seat (Optional); Anatomical Backrest (Optional); Transfer In And Out The Wheelchair - Vermeiren 708D User Manual

EN
NL
3.4

Anatomical seat (optional)

CAUTION
 Check that the seat is secure before use.
 Avoid getting your fingers caught during the assembly process.
3.5

Anatomical backrest (optional)

CAUTION
 Check that the backrest is secure before use.
 Avoid getting your fingers caught during the assembly process.
To use the anatomical backrest, proceed as follows:
1. Unscrew the flexible backrest.
2. Loosely screw on the brackets for the backrest.
3. Insert the backrest into the brackets from above.
4. Tighten the screws holding the brackets for the backrest.
5. Insert and tighten the safety screws for the backrest.
3.6

Transfer in and out the wheelchair

CAUTION
 In case you cannot perform the transfer in a safe manner, ask someone to assist you.
 Do not stand on the footplates.
3.6.1 Correct position in the wheelchair
Some recommendations for a comfortable use of the wheelchair:
 Position your backside as close as possible to the backrest.
 Make sure your upper legs are horizontal. If needed adjust the length of the footrests (see §
4.4).
Risk of injury
If you have opted for an anatomical padded seat, place it on the tubular
cross-hinge so that the seat's supports engage equally with the cross-
hinge. In the wooden base you will find slots that are placed in the
hinge's cross-pieces. To fold the wheelchair, remove the seat by
pulling it upwards.
Risk of injury
Risk of injuries
1. Position the wheelchair as close as possible to the chair,
couch or bed to/from you wish to transfer.
2. Check both brakes from the wheelchair are in the on
position.
3. Fold the footplates upwards to prevent standing on them.
4. If the transfer is on the side of the wheelchair, fold the
armrest on that side upwards (see § 3.3).
5. Transfer to/from the wheelchair.
10
708D
2023-01
Using your wheelchair