Footplate Angle; Footrest Width - Vermeiren Inovys Series Installation Manual

To adjust the length of the footrests:
1. Remove the socket screw (24) on the back of the footrest.
2. Adjust the footrest to a comfortable length.
3. Retighten the socket screw firmly.
4. Repeat for the second footrest. Make sure that the footrests are
positioned identically.

Footplate angle

3.7
To adjust the angle of the foot plate at its toothed clamp:
1. Loosen the socket screw (25) on the footrest (26).
2. Turn the footplate in the desired angle (80°- 100°). The
dashes (27) on the toothed clamp indicate the angular
positions.
3. Retighten the socket screw (25).
4. Repeat for the second footrest.

Footrest width

3.8
CAUTION
The maximum width of one footrest is limited by
the position of the two sockets screws. Both need
to be secured.
To adjust the width between the footrests:
1. Loosen the two socket screws (28) next to the
footrest, below the seat front.
2. Adjust the footrest to a comfortable width.
3. Tighten the screws (28) firmly.
4. Repeat this for the second footrest.
Make sure the footrests are positioned identically on both sides of the seat.
Risk of injuries
Installation manual
26
25
28
- 9 -
EN
Inovys wheelchairs
2019-02 NL
Adjustments
PL
CS
24
27
28