Table of Contents
Advertisement
3.8
Seat
3.8.1 Rotating the seat
L
WARNING:
Risk of tipping over – Be aware that you change the stability of your
wheelchair because the center of gravity shall changed.
The construction of the Gemini 2 makes it very easy to adjust the inclination and depth of the
seat. Also a full conversion of the orientation of the seating parts towards the person who is
pushing the Gemini 2 has been made very easy and fast to accomplish.
Check that the footrest is placed before the tubes of the lower frame before mounting the
seat frame.
1. Loosen the two wing nuts on
the back of the backrest.
2. Move the upper part (headrest)
of the backrest upwards or
downwards until the desired
backrest height (520 - 640 mm for
Gemini 2 32, 650 - 780 mm for
Gemini 2 40).
3.
Retighten the two screws and
wing nuts firmly by hand.
On the bottom of the backrest are
2 clamps for the safety belts.
This is an additional adjustment
depending on the personal needs
of each user.
Page 14
Gemini 2
2014-03
Advertisement
Table of Contents
