3.9.2 Backrest pelots (large)
3.9.3 Hip pelots
Adjusting height:
1. Loosen the two screws .
2. Move the backrest pelot up or
down until the desired height (2
positions: steps 40 mm).
3. Retighten the two screws .
4. Check that the pelot is well
fixated.
5. Repeat these instructions for the
other pelot.
Adjusting width:
1. Loosen the two screws .
2. Move the hip pelot outwards or
inwards until the desired width
(range 18,8 mm: stepless).
3. Retighten the two screws .
4. Check that the pelot is well
fixated.
5. Repeat these instructions for the
other pelot.
Page 18
Gemini 2
2014-03