Table of Contents
Advertisement
2.5
Operating the brake
L
WARNING:
The brake is not used to slow down the wheelchair during
movements – Use the brake only to prevent the wheelchair from unintended
movements.
L
WARNING:
Good operation of the brake is influenced by wear and
contamination of the tires (water, oil, mud, ...) – Check the condition of the tires
before each use.
L
WARNING:
The brake can wear – Check the operation of the brake before each
use.
L
CAUTION:
Risk of unintended movement – Make sure the wheelchair is on a flat
horizontal surface before releasing the brake.
The central brake must be used when the wheelchair is not in motion. First stop moving /
pushing the wheelchair Gemini 2 and use than the central brake.
The person who is pushing the Gemini 2 is responsible for the correct usage of the
brake.The Gemini 2 has been equipped with a central brake.
Push the central brake in direction to activate the brake. By pushing the central brake in
direction , the brake will be released.
A good performance of the break depends on the correct tyre pressure.
If the brake have lost their effectiveness because of wear and tear and/or damage to the
tyres and inner tubes, we advise you to consult your specialist dealer to renovate the
system, since he has suitable tools and knowledge.
Improper maintenance or the use of unsuitable tools might cause damage and/or loss of
function.
Page 2
Gemini 2
2014-03
Advertisement
Table of Contents
