Table of Contents
Advertisement
Gemini 2 40:
On the rear of the backrest frame is a rod and blocking pin .
1. Pull the pin to change the angle of the backrest.
2. Pull or push on the backrest until the desired angle (6 different positions in steps of
8°). The maximum angle is when the rod hits the blocking pin .
There is an extra hole (hole 7), that prevents that the backrest will be lift back
in the vertical position when the backrest is folded to the seat (for
transportation).
3. Release the pin .
4. Check that the backrest is well fixated.
3.7.2 Adjusting the height of the backrest
L
WARNING:
Risk of injury – Check that all connections and bolts are secured
before using the Gemini 2.
L
WARNING:
Risk of tipping over – Do not place more weight on the back
(example: a backpack or shopping bag). This will cause overweight at the
backrest and may cause the Gemini 2 to tip backwards, which can cause injuries
to the user of the Gemini 2! Adding additional elements to the Gemini is only
allowed after careful consideration and in collaboration with one of our retailers.
Page 13
Gemini 2
2014-03
Advertisement
Table of Contents
