Table of Contents
Advertisement
3.8.3 Mounting the seatframe
L
CAUTION:
Risk of injury - Check if the clamps are mounted correctly on the
frame during the placement of the seatframe.
L
CAUTION:
Risk of injury - Make sure the locking clamps are locked before
you place your child in the Gemini 2.
L
CAUTION:
Risk of clamping - Make sure no fingers, buckles or clothes are
squeezed between the seatframe and the lowerframe of the Gemini 2.
L
CAUTION:
Risk of injury - Switching the direction of the seat is only allowed
when the child is no longer present in the Gemini 2!
L
CAUTION:
Risk of injury - Do not use the Gemini 2 without the seatframe.
L
CAUTION:
Risk of injury - Check all connections, screws are secured before
using the Gemini 2.
The Gemini 2 stands for comfort when it comes to removing or switching positions of the
seating element. As such, you can push the Gemini 2 with your child facing forward or facing
towards you.
The seatframe will be disassembled as follows:
Use the brake to make the Gemini 2 unmovable.
Unlock the two clamps in the rear part of the seat.
Slide the full seatframe backwards and pull these vertically upwards while holding on to
the side supports.
Assembling the seatframe will happen in reverse order as described above.
Page 16
Gemini 2
2014-03
Advertisement
Table of Contents
