4.1.2 Footrest length (seat width 40)
3
4
4.1.3 Foot supports (optional)
32
6
1. Place the foot supports (5) on the footplate (6).
2. Place the screw-nut connections (7) and tighten by hand.
3. Place the wingnuts (8) and tighten firmly.
The footrest can be changed in 2 different lengths
(steps 35 mm: outer tube) and 4 different lengths
(steps of 25 mm: inner tube).
Adjustments are made as follows:
1. Loosen the screws (3) on both sides.
2. Move the footplate (4) up/down until the desired
3. Retighten the two screws (3).
3
4. Make sure that the footplate is firmly fixated.
5
8
7
Installation manual
length.
40
6
- 7 -
Gemini 2
2021-06
Contents
5
8
7
EN
NL