Side Supports (Pelots) - Vermeiren Gemini 2 Instruction Manual

The seat of the Gemini 2 can only be extended with additional elements after approval of
your retailer.
3.9

Side supports (Pelots)

3.9.1 Head pelots
Adjusting width:
1. Loosen the two knurled knobs  on
the rear side of the backrest.
2. Move the head pelot  inwards or
outwards until the desired position
(range 25 mm each side: stepless).
3. Retighten the two knurled knobs .
4. Check that the pelot  is well
fixated.
5. Repeat these instructions for the
other pelot .
Adjusting height:
1. Loosen the two knurled knobs  on
the rear side of the backrest.
2. Move the head pelot  up or down
until the desired height (range 30
mm: stepless).
3. Retighten the two knurled knobs .
4. Check that the pelot  is well
fixated.
5. Repeat these instructions for the
other pelot .
Adjusting height:
1. Loosen the two knurled knobs  on
the side of the backrest.
2. Move the head pelot  up or down
until the desired height (range 25
mm: stepless).
3. Retighten the knurled knobs .
4. Check that the pelot  is well
fixated.
5. Repeat these instructions for the
other pelot.
Adjusting depth:
1. Loosen the two knurled knobs  on
the side of the backrest.
2. Move the head pelot  to the front or
back until the desired depth (range
22,5 mm: stepless).
3. Retighten the two knurled knobs .
4. Check that the pelot  is well
fixated.
5. Repeat these instructions for the
other pelot.
Page 17
Gemini 2
2014-03