Table of Contents
Advertisement
Installing the Fan Assembly
To install the power supply fan assembly:
1.
Insert the new fan assembly into the power supply.
Be sure the tab passes through the locator hole. See Figure 3.
Figure 3. Tab in locator hole
2.
Install the five screws that hold the fan assembly in place.
See page 53, Figure 1.
3.
Put the power supply back into the VTrak enclosure and tighten the
mounting screws.
4.
Plug in the power cord and turn on the power supply at the switch.
This completes the replacement procedure for the power supply fan.
Replacing a Power Supply Fan
55
Advertisement
Table of Contents
