2N NetSpeaker Manual page 90

Skip to Next Line in Source
Enter the command to skip to the next file in the sequence in a source.
Defined by the CmdPar1 = SessionId and CmdPar2 = SourceId parameters. If
the CmdPar1 and CmdPar2 values are non-existent in the database, the server
replies OK, but no change will be executed for any existing session.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Request
<msg Id="CTI_NSPK_CMD_REQ">
<CTI_NSPK_IE_SES_CMD Cmd="NEXT" CmdPar1="0x4"
CmdPar2="0x4"/>
<CTI_IE_REFERENCE Ref="0x420"/>
</msg>
Response
<msg Id="CTI_NSPK_CMD_CONF">
<CTI_IE_REFERENCE Ref="0x420"/>
<CTI_IE_RESULT Result="OK"/>
</msg>
90