2N NetSpeaker Manual page 49

®
2N NetSpeaker Settings
Communication properties – set the server domain for the connected 2N
NetSpeaker
NetSpeaker connections
the passive mode (refer to the
parameters to establish connection to 2N® NetSpeaker.
Parameters:
Connection timeout – define the time interval between the connection making
attempts.
IP address – set the
IP port – set the
Automatic firmware upgrade – disable the
upgrade.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Figure: Multicast Setting Options
units not to connect to another
– set the connection parameters for
®
2N NetSpeaker
®
2N NetSpeaker
®
2N NetSpeaker
®
2N NetSpeaker scanner below).
IP address.
port; 6998 is the default value.
2N
Server in the network.
®
2N NetSpeakers
Save
®
NetSpeaker firmware
49
®
in
the