2N NetSpeaker Manual page 57

Output – there are different outputs for different roles and so refer to Subss. 1.3.1 –
1.3.3. for details.
List of sounds – or list of audio/music sources in files. Click on
required file. Play this file using the
Microphone – the left window section controls the hardware microphone of the PC
where Console is running.
TALK button – used for microphone activation. Upon activation, the ON AIR sign
goes on and the button changes into
playing from a file.
AUTOMUTE button – used for enabling the "Automatic microphone activation"
function. When you press the button, the
an example
presenter announces every song. In this case, the presenter selects a song from
the file at the beginning of broadcasting. He or she selects
talk when the song is over –
button is pushed for another song, the microphone is automatically
deactivated
You can enable
ton to the right of the lower screen. Listening in
to played files or microphone sound. Select the device to listen in via the
Setting–>Audio settings
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Figure: View of Console Control
Play
: The "College radio" broadcasts a few songs every evening and the
Automatic microphone activation
and the listeners do not hear the studio noise.
Listening in in the Console application too. To do so, push the
menu.
button.
MUTE . You can broadcast even during audio
Automute sign goes on. Let us
is used for activation of local listening
Add and select the
give
Automute and can
. When the Play
ON but
57