2N NetSpeaker Manual page 39

Action Setting
Having created an event according to Subs. 6.1. above, specify the contents of the
event, i.e. what shall be played and when.
Figure "Action Setting and Display" shows an example of a scheduled action. The
Activate/Deactivate session
end of each event. If you disable this property, however, the scheduled actions will not
start running in an inactive session. Also, all playlists are switched on
automatically
STOP action
Drag&drop the required action above the time axis of the event from the offer of
actions
playlist to be controlled within one session. A session can contain multiple playlists and
all the playlists can be administered.
You can modify the actions created as mentioned above according to the requirements
of the given event. Click on an action and edit its parameters in the "Action setting"
window. Refer to Figure "Action Setting and Display" for details on the
You can set different parameters than shown in Fig. 3 for different types of actions. You
can set the start time only for most action types and other properties for some of
them:
Play, Stop, Others, Previous and Activate/Deactivate session – set the
start time only.
Volume – set the playlist volume – the volume level plus a smooth volume
change.
Balance – set the playlist balance – in addition to start time, set a smooth
balance change via the
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Figure: Action Setting and Display
in a session that moves into the
to the beginning of the playlists that are not to be played.
in the time axis header (see the figure).
actions are added automatically to the beginning and
active
Change duration time
state. Therefore, assign the
Always move the action to the
Play
option.
action.
39