2N NetSpeaker Manual page 89

Pause Source in Session
Enter the command to pause a source in a session. Defined by the CmdPar1 =
SessionId and CmdPar2 = SourceId parameters. If the CmdPar1 and CmdPar2
values are non-existent, the server replies OK, but no source will be
suspended.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Request
<msg Id="CTI_NSPK_CMD_REQ">
<CTI_NSPK_IE_SES_CMD Cmd="PAUSE" CmdPar1="0x1"
CmdPar2="0x1"/>
<CTI_IE_REFERENCE Ref="0x420"/>
</msg>
Response
<msg Id="CTI_NSPK_CMD_CONF">
<CTI_IE_REFERENCE Ref="0x420"/>
<CTI_IE_RESULT Result="OK"/>
</msg>
89