2N NetSpeaker Manual page 78

Edit Session
Enter this command to edit a session. A session is defined by the SessionId
parameter. If the value differs from the values in the database, a new session
will be created. If the parameter value is equal to the value of an existing
session, the existing session with the specified value will be adjusted
according to other parameters. Name = session name, Priority, Channel =
session channel, MasterVolume = session volume, MasterBalance = session
balancing value, MasterFadeTime = time during which the volume or balance
change is effective if requested, PanelUserId = relates to the console panel,
PanelMode = relates to the console panel, PanelVirtualInputId = relates to the
console panel, FreeRideId = relates to the console panel.
< m s g
< C T I _ I E _ R E F E R E N C E
<CTI_NSPK_IE_SESSION SessionId="0x7" Name="Moje session upravena"
Flags="0x0"
MasterBalance="0"
PanelMode="USER"
F r e e R i d e I d = " 0 x F F F F F F F F " / >
</msg>
<msg
< C T I _ I E _ R E F E R E N C E
< C T I _ I E _ R E S U L T
</msg>
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Request
I d = " C T I _ N S P K _ S E T _ S E S S I O N _ R E Q " >
Priority="1" Channel="999"
MasterFadeTime="0"
Response
Id="CTI_NSPK_SET_SESSION_CONF">
R e f = " 0 x 4 2 1 " / >
MasterVolume="4096"
PanelUserId="0xFFFFFFFF"
PanelVirtualInputId="0xFFFFFFFF"
R e f = " 0 x 4 2 1 " / >
R e s u l t = " O K " / >
78