2N NetSpeaker Manual page 8

Select the
icon means that NetSpeaker is connected/ready and you can find him in
NetSpeakers & Zones menu.
Select mode
Set a
Administrator
®
2N TELEKOMUNIKACE a.s., www.2n.cz
NetSpeaker from the server side in the
NetSpeaker connections
Active mode means that
NetSpeaker Server automatically using the
parameter.
Search mode means that
Server in the network automatically, takes over the domain and gets
connected to the Server.
®
2N NetSpeaker
Figure: Setting Network Properties
Active mode + IP address of the server: save the setting and go to the
next step - NetSpeaker & Zones 2N
Passive mode + static IP address: save the setting and go to the next
step - NetSpeaker & Zones
New connection
-> NetSpeaker settings -> NetSpeaker connections
section.
®
2N NetSpeaker
®
2N NetSpeaker
mode and IP address if necessary. Green
®
( NetSpeaker
®
( 2N NetSpeaker
with the parameters set in "Passive mode") in
NetSpeaker settings
gets connected to the
Server IP address
®
finds the 2N NetSpeaker
will be restarted).
will be restarted).
.
–>
®
2N
8