2N NetSpeaker Manual page 74

List of All Sessions and Input Sources Assigned to Them
The command lists all the sessions and the sources assigned to them. A
session is defined by the SessionId parameter, the input source by the
SourceId parameter and a combination of the Type and Id parameters.
SourceId is the primary key of the source allocated to the session and
identifies the input source when multiple sources are in a session at the same
time. By combining the SessionId and SourceId parameters you get current
information on the source in a session such as the currently played file,
playing time position, etc. The Type and Id parameters help acquire general
information on the source, i.e. the source type, source files, file Id and file
duration.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Request
<msg Id="CTI_NSPK_GET_ALL_SESSIONS_SOURCES_REQ">
<CTI_IE_REFERENCE Ref="0x420"/>
</msg>
Response
<msg Id="CTI_NSPK_GET_ALL_SESSIONS_SOURCES_CONF">
<CTI_IE_REFERENCE Ref="0x420"/>
<CTI_NSPK_IE_SESSION_SOURCE SessionId="0x4" SourceId="0x5"
Flags="0x12" Type="PLAY_LIST" Id="0x1" Volume="4032"
Balance="7" FadeTime="0"/>
<CTI_NSPK_IE_SESSION_SOURCE SessionId="0x4" SourceId="0xB"
Flags="0x12" Type="PLAY_LIST" Id="0x4" Volume="4096"
Balance="0" FadeTime="0"/>
<CTI_NSPK_IE_SESSION_SOURCE SessionId="0x5" SourceId="0xA"
Flags="0x12" Type="PLAY_LIST" Id="0x5" Volume="153"
Balance="0" FadeTime="0"/>
</msg>
74