2N NetSpeaker Manual page 37

Scheduler
Scheduler
Scheduler is used for creating actions based on playlists. You can schedule various
actions for the playlists and assign them to time. A set of actions for playlists is called
Event and you can control multiple playlists in multiple sessions within one event.
Fig.1 shows an example of event with two sessions. One contains a playlist, the other
is without a playlist.
Event Creation
As mentioned above, the event is a set of actions to be executed over playlists.
Therefore, prepare a session including the required playlists before creating an event.
Only then you can start creating an event as follows:
Procedure:
Create a new event – use one of the following methods: click on the Scheduler tag
and then on the
assign an event to a date before creation by clicking on the required day and then on
Create event
®
2N TELEKOMUNIKACE a.s., www.2n.cz
What you should know
If the "Create actions for session activation and deactivation
automatically" option is enabled, session activation/deactivation
is set together with the first action for the session.
If you power up the server while the event "is in progress", the
actions will not be performed. The server must always be
activated before the beginning
Action: session activation automatically enables all playlists in
the session.
Create event
.
of the event.
menu item, or use the floating menu. Also, you can
37