2N NetSpeaker Manual page 75

Activate Session
Enter this command to enable a session. A session is defined by the CmdPar1
= SessionId parameter. If you specify a wrong SessionId, the server
processes the command and sends the OK message, but no session will be
activated.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Request
<msg Id="CTI_NSPK_CMD_REQ">
<CTI_NSPK_IE_SES_CMD Cmd="ACTIVATE_SESSION"
CmdPar1="0x4"/>
<CTI_IE_REFERENCE Ref="0x420"/>
</msg>
Response
<msg Id="CTI_NSPK_CMD_CONF">
<CTI_IE_REFERENCE Ref="0x420"/>
<CTI_IE_RESULT Result="OK"/>
</msg>
75