Quick Start
Quick Start Manual
Despite being a robust application for administration of a high number of
(loud)speakers,
purpose of the Quick Start manual is to provide easy installation and quick launch of
one playing. Just follow the quick steps below.
Box Contents
In addition to mounting accessories, the box includes the
installation CD with the
www.2n.cz
Installation Preparation
You need your
cable and a PC or server for installation.
Installation
®
2N
NetSpeaker Server
Launch the
Launch the
the server.
Having installed the
®
2N NetSpeaker Connection and Playing
Set your
figures below.
Connect the speakers to the network and switch on power. You can find the HW
manual
Launch the ControlPanel (default login data: name:Admin, password:2n).
Select
You can see all NetSpeakers connected to your LAN network.
Default configuration of the NetSpeaker is DHCP = ON (automatic IP address
configuration), SEARCH MODE = ON (Netspeaker will search for a server).
Mode
®
2N
TELEKOMUNIKACE a.s., www.2n.cz
What you should know
®
2N
NetSpeaker Server
installation.
Firewall may block the
®
2N
NetSpeaker
®
2N
for the latest software version.
®
2N
NetSpeaker
and
®
2N
NetSpeaker Server
®
2N
NetSpeaker
®
2N
NetSpeaker Server
®
2N
NetSpeaker
system and prepare playing following the instructions and
here
.
Administrator
-> NetSpeaker settings ->> NetSpeaker scanner
– select the passive/active/search mode.
Passive mode means that it is necessary to set connection to 2N
requires administrator rights for
®
2N
NetSpeaker Server
can be ready for playing in a few minutes. The
NetSpeaker
playing and control software. Refer to
Check the box contents before starting!
unit, a 12V/2A power supply or PoE switch, the UTP
®
2N
NetSpeaker
ControlPanel software installation:
installer on the PC used as the server.
ControlPanel installer on the PC used for control of
, you will be invited to restart the PC.
.
®
2N
NetSpeaker
unit and
.
®
7