Pantera
Engine Removal
1.
Remove the hood.
2.
Remove the springs securing pulse charger
to exhaust manifold.
Fig. 4-3
A398
3.
Remove the drive clutch from the engine with
the aid of the Arctic clutch puller (part no.
0144-110).
Fig. 4-4
Fig. 4-5
A400
5.
Loosen carburetor clamps and remove
carburetors from flanges. Disconnect im-
pulse line at this time; then disconnect wiring
harness from engine.
Fig. 4-6
A401
10. Lift engine free of chassis.
A399
6.
7.
8.
9.
Remove the three cap screws securing the
recoil; then move recoil free of engine.
Remove the two cap screws securing the
adjustable snubber to the front end.
Remove the four plastic plugs from the
underside of belly pan.
Remove the two cap screws and two socket
head cap screws securing engine to the
motor plate.
)1,
4.
Remove air intake hose from silencer.
Loosen clamps that hold silencer on carbure-
tors; then remove silencer.
24
11. Remove the four nuts and lock washers
securing the exhaust manifold to the engine.