Table of Contents
Advertisement
Drive Train
Inspection
II
NOTE: Whenever a part is worn excessively,
cracked, defective or damaged in any way,
replacement is necessary.
1.
Thoroughly wash all metallic drive train
components in cleaning solvent.
2.
Wash all plastic or rubber parts with soap and
water.
3.
Check drive shaft and driven shaft for
damaged splines or stripped threads.
4.
Check bearings for any roughness or dam-
age.
5.
Examine O-rings and chain case cover
gaskets for any breaks or damage.
6.
Examine the track for cuts, gouges or broken
cleats.
7.
Examine the keyways in both the driven shaft
and the brake hub.
8.
Examine the brake disc for excessive wear or
cracks.
9.
Examine the brake pads for wear.
10. Examine chain tensioner components.
100
Advertisement
Table of Contents
