Normal Start-Up Behavior Of The Inverter - Siemens SINAMICS CU240S DP-F Operating Instructions Manual

Operation
3.2 Start-up Behavior
3.2.1

Normal Start-up behavior of the Inverter

Normal start-up behavior of the inverter
A normal start-up is a start-up after a power-cycle or a black-out. It can be performed with or
without MMC.
Figure 3-1
3-2
MMC plugged?
P7844 = 1?
yes
(acceptance test/
confirmation)
Power Stack type
compliant?
yes
Ready
Normal start-up behavior
Power ON
swap?
yes
P8458 > 0?
(Clone Control)
yes
set?/Safety settings
yes
P8458 = 1?
(Clone Control)
P8458 = 0
(Clone Control)
adjust CU parameters
according to
Power Stack data
F0395
wait for
acceptance test /
confirmation
Operating Instructions (Compact), 04/2006, A5E00766042B AA
yes
go to
Swap behavior
yes
valid Par.
compliant?
MMC fault
F0061/F0063
Control Units CU240S