Erase - NETGEAR CG3300CMR User Manual

When you have located the .cfg file, click the Restore button to upload the file to the
2.
gateway.
Upon completion, the gateway reboots.
WARNING:
Do not interrupt the reboot process.

Erase

Under some circumstances (for example, if you move the gateway to a different network or if
you have forgotten the password), you want to erase the configuration and restore the factory
default settings.
Either press the Restore Factory Settings button on the back of the gateway (see
on page 79) or click the Erase button in this screen.
Default Settings
Erase sets the user name to admin, the password to password, and the LAN IP address to
192.168.1.1, and enables the DHCP of the gateway.
Wireless Cable Gateway CG3300CMR
Administration
50
Factory