Address Reservation - NETGEAR CG3300CMR User Manual

Wireless cable gateway
Table of Contents

Advertisement

Primary DNS server (if you entered a primary DNS address in the Internet Setup screen;
otherwise, the LAN IP address of the gateway)
Secondary DNS server (if you entered a secondary DNS address in the Internet Setup
screen)
To use another device on your network as the DHCP server or to configure manually the
network settings of all of your computers, clear the Use Router as DHCP Server check box
and click Apply. Otherwise, leave this check box selected. If this service is not enabled and
no other DHCP server is available on your network, set the IP addresses of your computer
manually or other devices cannot access the gateway.

Address Reservation

When you specify a reserved IP address for a computer on the LAN, that computer always
receives the same IP address each time it accesses the DHCP server of the gateway. Assign
reserved IP addresses to computers or servers that require permanent IP settings.
To reserve an IP address:
In the Address Reservation section of the LAN Setup screen, click the Add button.
1.
In the IP Address field, type the IP address to assign to the computer or server. (Choose an
2.
IP address from the LAN subnet of the gateway, such as 192.168.1.x.)
Wireless Cable Gateway CG3300CMR
genie Advanced Home
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents