Edite Or Delete A Port Forwarding Entry - NETGEAR CG3300CMR User Manual

Click the Add Custom Service button to display the following screen:
3.
In the Service Name field, enter a descriptive name.
4.
In the Protocol list, select the protocol. If you are unsure, select TCP/UDP.
5.
In the Starting Port fields, enter the beginning port number.
6.
If the application uses a single port, enter the same port number in the Ending Port
•
field.
If the application uses a range of ports, enter the ending port number of the range in
•
the Ending Port field.
In the Internal IP Address field, enter the IP address of your local computer that provides this
7.
service.
Click Apply. The service appears in the list in the Port Forwarding/Port Triggering screen.
8.

Edite or Delete a Port Forwarding Entry


To edit or delete a port forwarding entry:
In the table, select the radio button next to the service name.
1.
Click Edit Service or Delete Service.
2.
Wireless Cable Gateway CG3300CMR
Advanced Settings
65