Dynamic Dns - NETGEAR CG3300CMR User Manual

Click Add Service to display the following screen:
6.
In the Service Name field, type a descriptive service name. No spaces are allowed for the
7.
service name field.
In the Service User list, select Any (the default) to allow any computer on the Internet to use
8.
this service. Otherwise, select Single address, and enter the IP address of one computer to
restrict the service to a particular computer.
Select the service type, either TCP or UDP or both (TCP/UDP). If you are not sure, select
9.
TCP/UDP.
In the Triggering Port field, enter the number of the outbound traffic port that causes the
10.
inbound ports open.
Enter the inbound connection port information in the Connection Type, Starting Port, and
11.
Ending Port fields.
Click Apply. The service appears in the Port Triggering Portmap table.
12.

Dynamic DNS

If your Internet service provider (ISP) gave you a permanently assigned IP address, you can
register a domain name and have that name linked with your IP address by public Domain
Name Servers (DNS). However, if your Internet account uses a dynamically assigned IP
Wireless Cable Gateway CG3300CMR
Advanced Settings
68