Wireless Card Access List - NETGEAR CG3300CMR User Manual

Wireless Card Access List

By default, any wireless computer or device that is configured with the correct SSID is
allowed access to your wireless network. For increased security, allow only specific wireless
computers and devices to access the wireless network based on their MAC addresses.

To enable wireless card access:
Click the Set Up Access List button display the Wireless Card Access List screen.
1.
On this screen, you can restrict access to your network to specific devices based on their
MAC address.
Select the Turn Access Control On check box to enable the restricting of wireless
2.
computers and devices by their MAC addresses.
If Turn Access Control On is enabled and the Access Control List is
Note:
blank, then all wireless computers and devices are unable to
connect to your wireless network.
For information about how to add wireless computers and devices to the Access Control
3.
List, see
Wireless Client Access List Setup
Wireless Cable Gateway CG3300CMR
on page 56.
Advanced Settings
55