Gateway Rear Panel
The rear panel includes the following connections when viewed from top to bottom:
Two Gigabit Ethernet LAN ports. Use these ports to connect local computers.
•
Restore Factory Settings button. You can return the gateway to its factory settings.
•
Press and hold the Restore Factory Settings button for over 7 seconds. The gateway
resets and returns to its factory settings. See
Coaxial cable connector. Attach a coaxial cable to the cable service provider connection.
•
Power adapter input. Connect the power adapter unit here.
•
Power On/Off button. Press to turn on power. Press again to turn off power.
•
Wireless Cable Gateway CG3300CMR
Ethernet LAN ports
Restore Factory
connector
Power On/Off
Factory Default Settings
Connect to the Gateway
9
Settings
button
Coaxial
cable
Power
adapter
input
button
on page 79.