Midi Specifications - E-Mu Ultraproteus Operation Manual

MIDI SPECIFICATION
250
RECEIVED CHANNEL COMMANDS
Channels number (n) = 0-15. Message bytes are represented in hex. All other
numbers are decimal. Running Status is supported.
Command
Note Off
Note On
Key Aftertouch
Program Change
Channel Aftertouch
Pitch Bend
Realtime Controller
Footswitch
Volume
Pan
All Sound Off
Reset All Controllers
All Notes Off
Omni Mode Off*
Omni Mode On*
Mono Mode On (Poly Off)*
Poly Mode On (Mono Off)*
Bank Select
* Special Notes:
From Omni Mode ........... Omni Off turns Poly On.
From Poly Mode .............. Omni On turns Omni On; Mono On turns Mono On.
From Mono Mode ........... Mono Off turns Poly On; Omni On turns Omni On.
From Multi Mode ............ Omni On turns Omni On; Omni Off or Mono Off turns
All other changes have no effect.
UltraProteus Operation Manual
Message
8n kk vv
9n kk vv
An kk vv
Cn vv
Dn vv
En ll mm
Bn cc vv
Bn cc vv
Bn 07 vv
Bn 0A vv
Bn 78 00
Bn 79 00
Bn 7B 00
Bn 7C 00
Bn 7D 00
Bn 7E 00
Bn 7F 00
Bn 00 00 20 bb Cn pp
Poly On; Mono On turns Mono On.
Comments
release velocity is ignored
velocity 0 = note off
kk = 0-127 vv = 0-127
l = lsb, m = msb
cc = 00-31
cc = 64-79, vv ≥ 64 = on
0 = hard left, 127 = hard right
turns all sound off
ignored in omni mode
ignored in omni mode
forces all notes & controls off
forces all notes & controls off
forces all notes & controls off
forces all notes & controls off
bb = bank #
pp = program in bank
0-127
0-127
0-127