Table of Contents
Advertisement
Sound Delay
Sound Delay varies the time between the arrival of a MIDI Note-On message and
the onset of a note. The delay time is adjustable from 0 to 14 seconds (000-127).
Sound Start
This function allows you to set where a sample begins playing when you hit a
key. A setting of 000 plays a sound from the beginning, higher values move the
sample start point toward the end of the sound.
Sound
Start
The Sound Start parameter allows you to cut off the beginning of the sound. Higher
values move the start point toward the end of the sound.
Sound Reverse
When sound reverse is turned On, the instrument will be played backwards.
Since instruments tend to sound very different when reversed, this function
extends the number of possible sounds in UltraProteus.
SOUND DELAY
pri:000
sec:000
SOUND START
pri:000
sec:000
SOUND REVERSE
pri:Off
sec:On
SEE THE STEP-BY-STEP SECTION
OF THIS MANUAL FOR AN
APPLICATION USING SOUND
START.
THE SOUND START
PARAMETER CAN BE USEFUL
TO REMOVE THE GRADUAL
ATTACK OF A REVERSED
SOUND. THE LOOP OFFSET
PARAMETERS CAN ALSO BE
PUT TO GOOD USE WITH
REVERSED SOUNDS.
Chapter 8: Preset Menu
PRESET MENU
107
Advertisement
Table of Contents
