Midi Specifications - E-Mu MORPHEUS Operation Manual

RECEIVED CHANNEL COMMANDS
Channels number (n) = 0-15. Message bytes are represented in hex. All
other numbers are decimal. Running Status is supported.
Command
Note Off
Note On
Key Aftertouch
Program Change
Channel Aftertouch
Pitch Bend
Realtime Controller
Footswitch
Volume
Pan
All Sound Off
Reset All Controllers
All Notes Off
Omni Mode Off*
Omni Mode On*
Mono Mode On (Poly Off)*Bn 7E 00
Poly Mode On (Mono Off)*Bn 7F 00
Bank Select
* Special Notes:
From Omni Mode ... Omni Off turns Poly On.
From Poly Mode ..... Omni On turns Omni On; Mono On turns Mono On.
From Mono Mode ... Mono Off turns Poly On; Omni On turns Omni On.
From Multi Mode ... Omni On turns Omni On; Omni Off or Mono Off
turnsPoly On; Mono On turns Mono On.
All other changes have no effect.
Message
8n kk vv release velocity is ignored
9n kk vv velocity 0 = note off
An kk vv kk = 0-127 vv = 0-127
Cn vv 0-127
Dn vv 0-127
En ll mm l = lsb, m = msb
Bn cc vv cc = 00-31
Bn cc vv cc = 64-79, vv
Bn 07 vv 0-127
Bn 0A vv 0 = hard left, 127 = hard right
Bn 78 00 turns all sound off
Bn 79 00 ignored in omni mode
Bn 7B 00 ignored in omni mode
Bn 7C 00 forces all notes & controls off
Bn 7D 00 forces all notes & controls off
forces all notes & controls off
forces all notes & controls off
Bn 00 00 20 bb Cn pp
Chapter 11: Reference Section
Comments
64 = on
bb = bank #
pp = program in bank
MIDI SPECIFICATION
225