E-Mu Ultraproteus Operation Manual page 32

MIDIMAP MENU
PLEASE NOTE THAT THE SUB 2
OUTPUT IS AN "EFFECTS ONLY"
OUTPUT.
32
The Output Mix allows you to selectively route the program through one of the
effects processors or direct it to a pair of output jacks (for each of the 16 MIDI
channels). An additional selection called Preset or "P", allows the selection to be
made in the preset (Mix Output). Thus effects and outputs can be selected
according to MIDI channel or by preset.
Position the cursor under the channel number and use the data entry control to
change the MIDI channel. Position the cursor under the volume, pan or mix
and use the data entry control to change the value. The volume and pan values
are the same ones shown in the main screen.
The diagram below shows the function of Output Mix Select.
M I D I C h a n n e l 1
M I D I C h a n n e l 2
M I D I C h a n n e l 3
M I D I C h a n n e l 1 6
The Output Mix Select (for each MIDI channel) selects which bus in the Output Section
will be used.
UltraProteus Operation Manual
Mix
Select
O U T P U T S E C T I O N
& E F F E C T S P R O C E S S O R S
M
A
I
N
S
U
B
P r e s e t
= F X A
F
F X A
X
A
F
F X B
X
B
Output
Select
M
A
I
N
S
U
B
1
S
U
B
2