E-Mu Ultraproteus Operation Manual page 31

Table of Contents

Advertisement

Midimap Name
This function allows you to name each of the 16 Midimaps with a name of up to
12 characters. Position the cursor underneath the character location and use
the data entry control to change the character. The keyboard can also be used to
select characters.
This screen displays the current Midimap. The Midimap Select screen is the last
screen in the menu.
Preset/Hyper to MIDI Channel Assign
This function allows you to assign a preset or hyperpreset (program) to each
MIDI channel for the currently selected Midimap.
Position the cursor under the channel number and use the data entry control to
change the MIDI channel. Position the cursor under the program number and
use the data entry control to change the program assigned to each MIDI chan-
nel.
Pr e s e t / Hy p e r pr e se t No.
A ss i gn e d t o M ID I C h an n e l
Volume, Pan & Output Mix
This function sets the Volume, Pan Position and Output Mix for each MIDI
channel in the selected Midimap. Volume allows you to adjust the relative
volume between programs. Pan allows you to position each program in the
stereo field. The Volume control acts as an attenuator on the program volume.
It cannot increase the volume past the setting programmed in the program.
The Pan control Overrides the pan value programmed in the program.
V o l u m e
f o r M I D I C h an n el
S te r e o P a n P o si t i on
f o r M ID I C h an n el
MIDIMAP NAME
M15 New Song
PRESET/HYPER C01
0
061 Space Wash
VOL PAN MIX
C01
127 =P
FxA
M I D I C h a n ne l
M I D I C ha n ne l
O u t p ut M i x S el ec t
f or M I DI C h a nn el
Chapter 4: Midimap Menu
MIDIMAP MENU
THE AUTO-SELECT FEATURE IN
THE MASTER MENU MUST BE
TURNED ON IN ORDER TO
USE THE KEYBOARD FOR
NAMING MIDIMAPS.
THE MIDI CHANNEL SHOWN
IN THE RIGHT SIDE OF THE
SCREEN IS NOT THE MIDI
BASIC CHANNEL, ONLY THE
ONE BEING EDITED IN THE
MIDIMAP.
CHANNEL PAN SHOULD
NORMALLY BE SET TO "P"
UNLESS REALTIME CONTROL OF
PANNING IS DESIRED. IF PAN IS
SET TO "0", STEREO EFFECTS
CREATED IN THE PRESET WILL BE
LOST.
31

Advertisement

Table of Contents
loading

Table of Contents