Copy Preset - E-Mu Ultraproteus Operation Manual

The Copy menu functions allow you to copy data between Presets, Hyperpresets
or Midimaps. Selected groups of parameters, such as Function Generator or
Effects settings, can be simply copied, making it easy to build new Presets,
Hyperpresets or Midimaps.
• When using the Copy functions, you always copy INTO the Current
"Scratch" Preset, Hyperpreset or Midimap. The copy menus allow you to copy
data from anywhere in the machine.
To enable the Copy menu
Press the Copy key, lighting the LED. The current screen will be the one
most recently selected since powering up the machine. The cursor will
appear underneath the first character of the screen heading on line one.
To select a new screen
Press the Home/Enter key or press the cursor keys repeatedly until the
cursor is underneath the screen title heading. Rotate the data entry
control to select another screen.
To modify a parameter
Press the cursor key repeatedly (or hold the right cursor key while turning
the data entry control) until the cursor is underneath the parameter value.
Rotate the data entry control to change the value.
To return to the module
Press the Copy key, turning off the LED. You will be returned to the main
screen.
COPY MENU FUNCTIONS

Copy Preset

This function allows you to copy a preset from any location in UltraProteus into
the current preset location. The current preset is the preset showing in the
main screen.
COPY PRESET
0
000 Preset Name
REMEMBER TO SAVE YOUR
EDITED PRESET, HYPERPRESET
OR MIDIMAP IF YOU WANT
TO KEEP IT. A COPIED PRESET
IS NOT AUTOMATICALLY
SAVED!
Chapter 9: Copy Menu
COPY MENU
131