E-Mu Ultraproteus Operation Manual page 284

Configuration Request
Use this command to get configuration information. Note that much of the
information is dynamic (e.g. if RAM card is installed or not) and therefore the
information is only valid for some window of time. This command can be used
to determine if a card is presently installed.
F0 SysEx Status Byte
18 E-mu Mfg. ID
0C UltraProteus Product ID
dd Device ID 0-15
0C Command ID
F7 End of SysEx Status
Configuration Data
See the Request Command Description for information regarding the validity
of this information.
F0 SysEx Status Byte
18 E-mu Mfg. ID
0C UltraProteus Product ID
dd Device ID 0-15
0D Command ID
pl lsb Number of Presets
pm msb Number of Presets
s1 Sound Set Rank A
sl lsb Number of Insts Rank A
sm msb Number of Insts Rank A
s2 Sound Set Rank B
sl lsb Number of Insts Rank B
sm msb Number of Insts Rank B
hl lsb Number of Hyperpresets
hm msb Number of Hyperpresets
hl lsb Number of Filters
hm msb Number of Filters
ml lsb Number of Midimaps
mm msb Number of Midimaps
el lsb Number of A Effects
em msb Number of A Effects
el lsb Number of B Effects
em msb Number of B Effects
F7 End of SysEx Status
Chapter 11: Reference Section
MIDI SPECIFICATION
263