Copy Layer; Copy Filter; Copy Lfo - E-Mu Ultraproteus Operation Manual

COPY MENU
DATA COPIED FROM THE SAME
PRESET WILL COME FROM THE
SAVED VERSION OF THE PRESET,
NOT THE EDITED VERSION. THIS
COULD BE USED AS A "REVERT"
FEATURE IF YOU MAKE A
MISTAKE WHILE EDITING.
132

Copy Layer

This function allows you to copy everything in the primary or secondary layer
(or both) from another preset into the current preset. A primary layer may be
copied into the secondary layer and vice-versa. Only parameters which are
designated "primary" or "secondary" will be copied. Parameters such as the
LFOs or modulation routings will NOT be copied.
There are five options available: Pri to Pri, Pri to Sec, Sec to Sec, Sec to Pri, Pri
& Sec (Both).

Copy Filter

This function allows you to copy the filter settings for the primary or secondary
layer (or both) from another preset into the current preset.
Copy Filter copies the following parameters only: Filter Type, Filter Level,
Morph Offset, Filter Frequency Track (initial setting), Filter Transform 2 (initial
setting) and Filter Reverse.
There are five options available: Pri to Pri, Pri to Sec, Sec to Sec, Sec to Pri, Pri
& Sec (Both).

Copy LFO

This function allows you to copy the LFO settings for LFO1, LFO2 or both from
another preset into the current preset.
There are five options available: 1 to 1, 1 to 2, 2 to 2, 2 to 1, 1 & 2 (Both).
UltraProteus Operation Manual
COPY LAYER P P
0
000 Preset Name
COPY FILTER P P
0
000 PresetName
COPY LFO 1 1
0
000 PresetName