Table of Contents
Advertisement
CONNECTION INSTRUCTIONS
MANY OF THE ULTRAPROTEUS
FACTORY PRESETS HAVE BEEN
PROGRAMMED TO USE A FOOT
PEDAL CONTROLLER. TO USE
THIS EXCITING FEATURE, SET
YOUR MIDI CONTROLLER TO
TRANSMIT THE FOOTPEDAL ON
CONTINUOUS CONTROLLER
NUMBER 4. (This is the default
value, which can be be changed to
any controller number.)
6
SETUP #2 STUDIO SETUP
MIDI Controller
(MIDI Keyboard, Sequencer, etc.)
MIDI Out
E-MU SYSTEMS, INC.
Scotts Valley, California U.S.A.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
100-250VAC 50/60 Hz ~
THIS PRODUCT TO RAIN OR MOISTURE.
MIDI In
In this setup, UltraProteus is controlled by MIDI messages received at the
MIDI In connector which have been routed by a MIDI switcher. The MIDI
switcher allows any MIDI controller such as a MIDI keyboard, MIDI wind
controller or a computer to be easily connected.
MIDI Out
The MIDI Out jack is normally used to transmit MIDI System Exclusive data to
a computer or other device.
Audio Outputs
UltraProteus has three sets of programmable stereo outputs; Main, Sub 1, and
Sub 2. Sub 1 is a non-effects output, Sub 2 is an effects-only output. Specific
UltraProteus presets (or MIDI channels) can be routed to one of these stereo
pairs in order to be further processed or mixed separately.
UltraProteus Operation Manual
Computer
MIDI
MIDI
Out
In
In
In
Out
MIDI Switcher
Out
Out
In
MIDI
IN
OUT
THRU
R - SUB2 - L
Additional
MIDI
Devices
MIDI In
OUTPUTS
R - SUB1 - L
R - MAIN - L
MONO
STEREO
Advertisement
Table of Contents
