Sound Delay; Sound Start; Preset Menu (Cont); Sound Reverse - E-Mu MORPHEUS Operation Manual

• Sound Delay

Sound Delay varies the time between the arrival of a MIDI Note-On
message and the onset of a note. The delay time is adjustable from 0 to
14 seconds (000-127).

• Sound Start

This function allows you to set where a sample begins playing when
you hit a key. A setting of 000 plays a sound from the beginning, higher
values move the sample start point toward the end of the sound.
Sound
S t a r t
The Sound Start parameter allows you to cut off the beginning of the sound. Higher
values move the start point toward the end of the sound.

• Sound Reverse

When sound reverse is turned On, the instrument will be played back-
wards. Since instruments tend to sound very different when reversed,
this function extends the number of possible sounds in Morpheus.
SOUND DELAY
pri:000 sec:000
SOUND START
pri:000 sec:000
SOUND REVERSE
pri:Off sec:On
Chapter 8: Preset Menu
PRESET MENU
••• See the Step-By-Step
section of this manual for an
application using Sound
Start.
••• The Sound Start
parameter can be useful to
remove the gradual attack
of a reversed sound. The
Loop Offset parameters
can also be put to good
use with reversed sounds.
107