Paper Jams At 2D And Lever 2G - Xerox D95 User Manual

Standard Finisher Plus
4. If you cannot remove the paper, return the lever 2e to its original position. Swing
the lever 2e, turn the knob 2c to the right, and remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
5. Return the opened lever ( 2f) or ( 2e) to its original position, and close the output
tray ( 2d).
6. Close the Right Cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.

Paper jams at 2d and lever 2g

Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.
1. Make sure that the machine has stopped printing.
23-28 ®
Xerox D95/D110/D125 Copier/Printer
User Guide