Xerox D95 User Manual page 271

(continued)
Fault code Possible cause
049 945 HCS detects Top Tray as
always full
049 960 Sensor fault
049 964
049 965 Stacker height limit or full
detection fault
049 966
049 967 HCS detects paper still
remaining on stacker cart
after the front door was
opened/closed.
049 968 Mix size, stacker full
detection fault
049 969 Stacker cart elevator motor
fault
®
Xerox D95/D110/D125 Copier/Printer
User Guide
High Capacity Stacker (HCS)
Recommended solution
• Carefully remove all sheets and paper
scraps from jam clearance areas.
• Power Off/On the machine
• If the problem still exists, contact the
Customer Support Center.
• Power Off/On the machine
• If the problem still exists, contact the
Customer Support Center.
• Power Off/On the machine
• If the problem still exists, contact the
Customer Support Center.
• Open the HCS front door.
• Remove any paper from stacker cart.
• Close front door
• If necessary, power Off/On the
machine
• If the problem still exists, contact the
Customer Support Center.
• Open the HCS front door.
• Remove any paper from stacker cart.
• Close front door
• If necessary, power Off/On the
machine
• If the problem still exists, contact the
Customer Support Center.
• Open the HCS front door.
• Remove any paper from stacker cart.
• Close front door
• If necessary, power Off/On the
machine
• If the problem still exists, contact the
Customer Support Center.
20-15