Entering The Quantity; Starting The Copy Job; Cancelling The Copy Job; Interrupting The Copy Job - Xerox D95 User Manual

3. If previous settings remain, press the Clear All button on the control panel.
4. Select the applicable features from each section as necessary.
5. Select one of the Copy, Copy & Store File or Store File Only.

Entering the Quantity

You can enter up to 9999 for the number of copies.
1. Enter the number of copies needed. The number of copies entered appears on the
upper right of the screen.
2. To clear an incorrect value, press the C button and enter the correct value.

Starting the Copy Job

After setting all the applicable copy features from the Copy tab screen, you can press
the Start button to begin copying.
Note
If a problem occurs, an error message appears on the display. Solve the problem in
accordance with the message on the display.

Cancelling the Copy Job

1. Press the Stop button on the Control Panel.
2. From the Stop/Pause screen, select Cancel Printing or Resume Printing.
3. If the Current and Pending Jobs screen does not appear, press the Job Status button
on the control panel.
4. Select the job to cancel from the displayed list, and then select Stop.
Note
If the job is a short one, the job may complete before you are able to cancel it.

Interrupting the Copy Job

To temporarily interrupt a copy job in progress in order to perform another copy job,
follow these steps:
1. Press the Interrupt button.
Note
The Interrupt button lights and the Copy tab screen displays. This means the machine
is in the job interrupt mode.
2. Place a document in the document feeder or on the document glass and change the
feature settings as required.
3. Enter the quantity.
4. Press the Start button.
®
Xerox D95/D110/D125 Copier/Printer
User Guide
Copy
4-5