Calling A Stored Program - Xerox D95 User Manual

Stored Programming

Calling a Stored Program

When you call a specified stored program, the last screen shown when you registeredthe
stored program appears.
1. Press the Services Home button.
2. Select Stored Programming.
3. Select a number of a stored program containing the features you want to use. You
can only select registered numbers.
4. After the stored program is called, select other features if necessary.
5. Press the Start button.
To use a Stored Program for a Build Job, continue.
6. Select Change Settings.
7. Select Job Assembly.
8. Select Stored Programming.
9. Select a number of a stored program containing the features you want to use. You
can only select registered numbers.
8-4 ®
Xerox D95/D110/D125 Copier/Printer
User Guide