Starting A Job Flow Manually; Job Flow Sheet Filtering - Xerox D95 User Manual

• Select Close.
Note
Selecting Cut Link at any time to remove Job Flow Sheet linkage.
10. The Job Flow Sheet has been linked to the mailbox. Select Close to exit to the Tools
tab.

Starting a Job Flow Manually

You need to start a Job Flow manually if the Job Flow Sheet was not set to automatically
release when it was assigned to a mailbox.
1. Load the original document(s).
2. Select the Services Home button on the controller.
3. Select the Job Flow Sheets icon and if enabled by the System Administrator, select
OK.
4. Select a listed Job Flow Sheet.
5. Press the Start button. The job runs and is placed in a mailbox or appropriate server.

Job Flow Sheet Filtering

Job Flows can be filtered by authorization. See "Job Flow Sheet Types" in the System
Administration Guide for more information.
1. Press the Services Home button.
2. Select Job Flow Sheets and select OK.
3. Select Sheet Filtering.
4. The following filtering options are available:
a) Owner options:
• System Administrator - If this box is checked, the only Job Flow Sheets available
to the System Administrator are displayed.
• Non-System Administrator - If this box is checked, Job Flow Sheets displayed
do not include those available to the System Administrator.
• No Filtering - When both the System Administrator and Non-System
Administrator boxes are checked, all the Job Flow Sheets are displayed.
b) Target options: Place a check in each job type you want displayed.
5. Select Save.
®
Xerox D95/D110/D125 Copier/Printer
User Guide
Job Flow
7-5