Xerox D95 User Manual page 282

Standard/Booklet Maker Finisher
3. While pressing the lever to the right, pull out the booklet staple cartridge unit.
4. Hold the tabs of the staple cartridge unit by the tabs and lift to remove it.
5. While holding the tabs of a new staple cartridge, push it into the unit.
6. Push the staple cartridge unit to its original position in the machine.
7. Close the Right Cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
21-10 ®
Xerox D95/D110/D125 Copier/Printer
User Guide