Form Overlay; Delete Outside/Delete Inside - Xerox D95 User Manual

Copy

Form Overlay

You can make copies overlaying the first page of the document on the rest of the
documents. For example, if the first page of the document only has a header and footer,
the rest of the documents can be copied with the same header and footer.
1. From Job Assembly, select Form Overlay.
2. From the Form Overlay screen, select On or Off.
3. Select Save to keep your choices.
• If the first page is two sided, only the top side is used for the form overlay.
• The Center/Corner shift, Image shift, Delete Outside/Delete Inside, Edge Erase,
Border Erase features are applied to the text body.

Delete Outside/Delete Inside

1. Select Copy on the Services Home window.
2. Select Job Assembly.
3. Select Delete Outside/Delete Inside.
4. Select either Delete Outside or Delete Inside.
5. If the originals are 2-sided, select the applicable option:
• Both Sides
• Side 1 Only
• Side 2 Only
6. Select the Area 1 button.
7. To define a specific area, enter the two X/Y coordinates within a range 0.0-17.0 inches
(0.0-431.8 mm). Navigate from coordinate to coordinate by selecting each X/Y button:
a) Select the Y1 box and use the numeric keypad on the control panel to enter the
value for Y1.
b) Select the Y2 box and use the numeric keypad on the control panel to enter the
value for Y2.
c) Select the X1 box and use the numeric keypad on the control panel to enter the
value for X1.
d) Select the X2 box and use the numeric keypad on the control panel to enter the
value for X2.
Clear a deletion area by selecting the Clear Area X (1, 2, or 3) button.
8. Select Save.
9. Select Save again.
10. Enter the Quantity and press Start.
4-24 ®
Xerox D95/D110/D125 Copier/Printer
User Guide