Connection Via Wlan - Casio DT-X7 Series Quick Start Manual

5.5 Connection via WLAN

To establish communication between the DT-X7 and PC via WLAN configuration, follow the steps, 1 to
6, below to set up a WLAN configuration on the DT-X7. After setting up the configuration, be sure to
perform a site survey prior to starting communication via WLAN.
1. Navigate to Start → Settings → WLANConfig and then click IP tab.
Figure 5.25
Table 5.1
Parameter
Enable DHCP or Configure IP
IP
MASK
GateWay
DNS1
DNS2
WINS1
WINS2
2. If any of the settings in Figure 5.25 is omitted, the process described in the following table will
automatically take effect in the field.
Table 5.2
Parameter
Enable DHCP or
Configure IP
IP
MASK
GateWay
DNS1
DNS2
WINS1
WINS2
Determines "Enable" or "Disable" for DHCP.
Determines IP address.
Determines subnet mask.
Determines default gateway.
Determines primary DNS address.
Determines secondary DNS address.
Determines primary WINS address.
Determines secondary WINS address.
Nothing is set (DHCP)
"Enable DHCP" is assumed.
Does not determine IP address.
Does not determine subnet mask.
Does not determine gateway.
Does not determine primary DNS
address.
Does not determine secondary DNS
address.
Does not determine primary WINS
address.
Does not determine secondary WINS
address.
42
Description
"Configure IP" is set
"Configure IP" is set.
Entered address is set as is.
Entered address is set as is.
Entered address is set as is.
Entered address is set as is.
Entered address is set as is.
Entered address is set as is.
Entered address is set as is.