5.1 ActiveSync Connection via USB
In nearly all cases during development work you will be communicating with the DT-X7 via an
ActiveSync connection. There are many ways to connect the DT-X7 to a PC via ActiveSync.
If you have already installed ActiveSync and connected the DT-X7 to the PC via direct USB, You may
skip Chapter 5.1.1 "Installing ActiveSync for the First Time". You already have the USB driver and
ActiveSync in your development environment. If you do not yet have the cradle driver on your PC,
download the USB driver files "wceusbsh.inf" and "wceusbsh.sys" from the CASIO Web Site and copy
them to an appropriate folder.
5.1.1 Installing ActiveSync for the First Time
1. Install ActiveSync first. Run the ActiveSync 'msi' file.
Figure 5.1
2. Click Install button.
Figure 5.2
29