Casio DT-X7 Series Quick Start Manual page 63

3. Registration of bar code and note
Enter bar code data in the Code field (see Figure 7.6) and a note about the bar code in the Note
field if necessary. Click OK button to complete the bar code registration.
Figure 7.7
4. Completion of registration
After completion of the bar codes registration, the screen in Figure 7.7 shows a list of bar codes that
have been registered in the I/O Simulator. Prior to debugging with the Device Emulator, make
sure that you register all bar codes you wish to use in debugging.
Figure 7.8
Note:
In the DT-X7 Device Emulator, types of bar code symbology can be registered are limited to ones which
are set effect for reading. At a time of starting up the emulator, all the types of bar code symbology are set
readable by default. However, readable bar code symbologies in debugging application software are
defined by the setting of the application software to be debugged.
63